POLARIS RZR 900 RACKBOSS 2.0 RACK AND PINION FOR BIG LIFT KITS
SKU : HDRP-P-RZR9S-002-Z7
NOTE: Only for use with SuperATV 7”–10” Lift Kits
Don’t Settle for Less Than the Best
When you’re taking on rough terrain, you need maximum control—sloppy steering from a worn out rack and pinion just won’t cut it. Every rack and pinion breaks down eventually, right? No way! Don’t settle for anything less than the best. Get SuperATV’s Polaris RZR 900 RackBoss 2.0 Rack and Pinion. We built it to never wear out with our X24 technology. We use a unique dual-bushing design that reduces wear by more than 50%. A RackBoss 2.0 rack and pinion lets you add big tires, lifts, and lots of weight without ruining your steering. It may not be the most flashy upgrade, but you’ll notice it every time you’re behind the wheel.
Dual-Bushing Design for Strength
X24 tech is the answer to the wear and tear that destroys most rack and pinions. To make RackBoss 2.0 the best rack and pinion, we use durable PTFE bushings at both ends that eliminate play from the internal gears and tension spring. Altogether, X24 tech reduces wear by over 50%. We also include a built-in grease fitting so you can keep everything well lubricated. Better lubrication + X24 tech = an unkillable rack and pinion.
Solid Steel Bar Z-Bend Tie Rods
Our heavy-duty tie rods are built to take a beating. They’re made from a full 1” diameter solid steel bar. The heim joints are pretty hardcore too, with 16 mm rack threads and 3/4” rod threads. These tie rods are also built with a special Z-bend design that’s stronger and more reliable. The bends are reinforced with custom gussets for superior durability and performance. With tie rods like these, you’ll be able to take on the roughest trails without hesitation.
When you’re taking on rough terrain, you need maximum control—sloppy steering from a worn out rack and pinion just won’t cut it. Every rack and pinion breaks down eventually, right? No way! Don’t settle for anything less than the best. Get SuperATV’s Polaris RZR 900 RackBoss 2.0 Rack and Pinion. We built it to never wear out with our X24 technology. We use a unique dual-bushing design that reduces wear by more than 50%. A RackBoss 2.0 rack and pinion lets you add big tires, lifts, and lots of weight without ruining your steering. It may not be the most flashy upgrade, but you’ll notice it every time you’re behind the wheel.
Dual-Bushing Design for Strength
X24 tech is the answer to the wear and tear that destroys most rack and pinions. To make RackBoss 2.0 the best rack and pinion, we use durable PTFE bushings at both ends that eliminate play from the internal gears and tension spring. Altogether, X24 tech reduces wear by over 50%. We also include a built-in grease fitting so you can keep everything well lubricated. Better lubrication + X24 tech = an unkillable rack and pinion.
Solid Steel Bar Z-Bend Tie Rods
Our heavy-duty tie rods are built to take a beating. They’re made from a full 1” diameter solid steel bar. The heim joints are pretty hardcore too, with 16 mm rack threads and 3/4” rod threads. These tie rods are also built with a special Z-bend design that’s stronger and more reliable. The bends are reinforced with custom gussets for superior durability and performance. With tie rods like these, you’ll be able to take on the roughest trails without hesitation.
- Heavy-duty dual PTFE bushings:
- Designed with X24 tech
- Prevents wear
- Reduces slop
- Improves overall durability
- Solid steel and billet aluminum tie rods use:
- 3/4” outer tie rod ends
- Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
- 65% larger housing than stock
- Over 50% less wear than OEM after 15,000 cycles
- Grease fitting for rack gears
Fitment
- Polaris RZR S 900 : 2015+
- Polaris RZR 4 900 : 2015-2018
- Polaris RZR S4 900 : 2018
NOTE: Only for use with SuperATV 7”–10” Lift Kits
jds 2/6/23